Embedded Files
Qty
Description
Picture
2
Bezel (Left and Right)
8
Lamp retaining Clips
16
Lamp retaining Screws (#8 size)
6
Unbreakable Headlight Adjuster Clips
12
Adjuster Clips Screws (#6 Size)
Which lamp to use?
Compatible with generic 7" lights. Not jeep-specific ones. We recommend high quality DOT approved lights. Examples:
Holley Retrobright - Classic choice!
JW Speaker 8700
Morimoto Super 7
Vision X VX series
And hundreds more. If you want to preserve the position light, you can find 7" round headlight with position lights built in, or halo lights, or DRLs. You can wire these to the position light wires, or to a separate switch. The possibilities are endless!
Grab one headlight bezel and install the headlight adjuster clips
Place lamp in bezel, make sure it is aligned and rotated as it should be.
Place headlight retainer clips in the mopst suitable locations. You only need 3 clips, but we included 4 for good measure.
Secure headlight adjuster clips with the #8 screws
Repeat on the other side
Plug the lamp. If the lamp came with an H4 connector, it should connect directly with no adapters.
Plus the 3 adjuster clips into place just like the oem light!
Page updated
Report abuse